Ubiquiti UniFi Pro Max 16 PoE Switch

Ubiquiti Pro Max 16 PoE Technical Specifications

Mechanical Dimensions

• Dimensions: 325.1 x 160 x 43.7 mm (12.8 x 6.3 x 1.7″)
• Weight: 2.1 kg (4.6 lb)
• Enclosure material: SGCC steel

Mechanical Hardware

• Management interface: Ethernet In-Band
• Networking interface:
  • (12) GbE RJ45 ports
  • (4) 1/2.5 GbE RJ45 ports
  • (2) 10G SFP+ ports
• PoE interface:
  • (12) PoE/PoE+ (Pins 1, 2+; 3, 6-)
  • (4) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 😎
• Total non-blocking throughput: 42 Gbps
• Switching capacity: 84 Gbps
• Forwarding rate: 62.496 Mpps
• Power method: DC adapter
• Power supply: 54V, 210W
• Max. power consumption: 30W (Excluding PoE output)
• Total available PoE: 180W
• Max. PoE wattage per port by PSE:
  • PoE: 15.4W
  • PoE+: 30W
  • PoE++: 60W
• Voltage range PoE mode:
  • PoE: 44—57V
  • PoE+/PoE++: 50—57V
• LCM display: (1) 1.3″ touchscreen
• Button: Factory reset
• Ambient operating temperature: -5 to 40° C (23 to 104° F)
• Ambient operating humidity: 10 to 90% noncondensing
• Certifications: CE, FCC, IC

Mechanical Switching Features

• Layer 2 features:
  • IGMP snooping
  • STP / RSTP with priorities and port-level disable
  • Port isolation
  • Storm control
  • Voice VLAN
  • Port mirroring
  • LACP port aggregation
  • Multicast / broadcast rate limiting
  • MAC address blocking
  • Flow control
  • 802.1X control
  • Jumbo frames
  • Proprietary loop protection
  • DHCP snooping / guarding
  • Egress rate limit
  • LLDP-MED
  • Port restricted by MAC
  • Device isolation with ACLs
• Layer 3 features:
  • DHCP for locally-managed networks
  • DHCP relay
  • Inter-VLAN routing between networks on same switch
  • Static routing between local networks
  • Network isolation with ACLs
  • Etherlighting™

Mechanical Application Requirements

• UniFi Network: Version 8.1.127 and late